Subaru 2.0L DOHC Turbo Short Block w/ Forged Internals (02 – 05)



2.0L Turbo (02-05)


Core Deposit * 

Core Deposit is REQUIRED, Unless You Send Us Your Engine First

Other Services Available:




Here at Sunwest, we take pride in the Subaru engines that we build. Our engines are built to exceed the quality and performance of one from the factory by addressing the main causes of failure in Subarus: rod and/or rod bearing failure, oil consumption and head gasket failure. We are proactive by taking preventative measures to ensure that our motors outlast any other.
Subaru EJ205 Turbo Short Block w/ Forged Internals 2.0L DOHC 2002 – 2005 WRX
Blueprinted Performance Build Includes:
– New OEM 2.0L Crankshaft
– Manley H-Beam Rods
– Manley Forged Pistons
– ARP Head Studs Included
– King XPG Performance Rod and Main Bearings
– Short Blocks – $2,995 / $500 core
Machine Work Done:
– Engines are cleaned, all bolt holes checked and repaired if needed
– Surfaces are checked and milled
– Blocks are honed with deck plates to mimic the cylinder distortion of an assembled motor (addresses oil blow by)
– Blocks are bored and honed with a computer controlled diamond hone down to .0005″ clearance (addresses piston slap)
– Crankshaft is ground (if needed) and polished
– Deck Surface is milled on a CBN Rottler Machine
– Balanced rotating assembly
Additionally, our Long Blocks also include:
– Complete gasket set for install (including 6-Star multi-layer steel head gasket, addresses head gasket issues)
– Complete cylinder head rebuild (new guides and seals, 3 angle valve job, cams reconditioned/polished, OEM cam seals)
– New OEM timing kit installed
– New Oil Pump installed
– New Water Pump installed
– All Long Blocks are pre-ran on our SIM test machine to give an accurate reading of oil pressure, cylinder compression and engine load
There is a $500 refundable core deposit in addition to the purchase price, that is REQUIRED before item will ship OR you can send us your engine first . Some or all of you deposit will be refunded once your core is returned and inspected.
For turbo motors, your oil cooler MUST be replaced (they cannot be flushed). The turbo must also be thoroughly flushed or replaced.
We also have new parts available including: oil pumps, water pumps, timing kits, gasket sets, oil cooler and turbos. Give us a call today!


Additional information

Weight 115 lbs
Dimensions 20 × 20 × 20 in


There are no reviews yet.

Be the first to review “Subaru 2.0L DOHC Turbo Short Block w/ Forged Internals (02 – 05)”

Your email address will not be published. Required fields are marked *

You may also like…